2.0 — 82 — 12 October 2012
Launcher
Disassemble the launcher
9 Place the launcher into the prevailing wind direction.
11.3 Disassemble the launcher
P
REREQUISITES
● Crank
Once the flight is done, you can disassemble the launcher.
1 Fix the crank between your ties.
2 Release the force with the crank very gently while pulling the release handles upwards.
Make sure you counteract the force on the elastics. It might be possible that you have to
tighten the elastics a little bit so that you are able to pull the release handles upwards.
To Next Page
Loading...