Gatewing X100UAS - 24 MAINTENANCE; 24.1 Update the Autopilot settings file

2.0 — 209 — 12 October 2012
24
MAINTENANCE
24.1 Update the Autopilot settings file
P REREQUISITES
● X100 body
● eBox
● Battery
● Download cable
● X100_vx_x.exe file
● GCS
The Autopilot settings file can be updated by executing the X100_vx_x.exe file.
1 Download the X100_vx_x.exe file to the desktop of the GCS.
2 Mount the eBox in the X100.
3 Connect the GCS and the X100 with the download cable.
4 Connect the battery with the X100.
5 Put the X100 in DOWNLOAD mode.
N
OTE: Wait 20 seconds for initialization.
6 Double-click X100_vx_x.exe.
7 Wait until the message
Please power cycle your autopilot now appears and then per-
form a POWER CYCLE on the X100.
N
OTE: Wait 20 seconds for initialization and then press OK.