2.0 — 32 — 12 October 2012
X100 parts
X100 body parts
● The airspeed is being reset in preparation of a flight
1 Cover the pitot tube with the pitot cover.
Remove the pitot cover
P
REREQUISITES
● X100 body
The pitot cover needs to be removed from the pitot tube before flight.
D
ANGER: Not removing the pitot cover will result in a crash when launching the X100.
1. Remove the pitot cover from the pitot tube.
R
ESULT
:
The pitot tube is clear an can be used to measure the airspeed.
To Next Page
Loading...