P50 Agile P153    Chapter 2 - Safety Information 
 
 
5  REGULATORY COMPLIANCE 
Compliance with the European Commission Directive on EMC and LVD is demonstrated using a technical 
file. 
 
 
5.1  EMC COMPLIANCE: 2014/30/EU 
The product specific Declaration of Conformity (DoC) lists the relevant harmonised standard(s) or conformity 
assessment used to demonstrate compliance with the EMC directive. 
 
5.2  LVD COMPLIANCE: 2014/35/EU 
The product specific Declaration of Conformity (DoC) lists the relevant harmonized standard(s) or conformity 
assessment used to demonstrate compliance with the LVD directive. 
Safety related information, such as the installation I overvoltage category, pollution degree and operating 
temperature ranges are specified in the Technical Data section of the relevant product documentation and/or 
on the product labelling. 
Unless otherwise stated in the Technical Data section of the relevant product documentation, the equipment 
is intended for indoor use only. Where the equipment is required for use in an outdoor location, it must be 
mounted in a specific cabinet or housing to provide the equipment with the appropriate level of protection 
from the expected outdoor environment.