AquaTrans™ AT600 User’s Manual 3
Chapter 1. General Installation Instructions
1.3 Safety Guidelines
To ensure safe and reliable operation of the AT600, the system must be installed in accordance with the
guidelines discussed in this manual. This chapter includes the following topics:
• “Unpacking the AT600 system” on page 4
• “Installing the Electronics Enclosure” on page 5
• “Choosing a Clamp-On Fixture/Transducer Location” on page 7
• “Mounting the Clamp-on Fixture and Transducer System” on page 8
WARNING! The AT 600 flow transmitter can measure the flow rate of many fluids, some of which
are potentially hazardous. The importance of proper safety practices cannot be overemphasized.
WARNING! Be sure to follow all applicable local safety codes and regulations for installing electrical
equipment and working with hazardous fluids or flow conditions. Consult company safety personnel
or local safety authorities to verify the safety of any procedure or practice.
ATTENTION EUROPEAN CUSTOMERS! To meet CE Marking and UL Marking requirements, all cables
must be installed as described in “Wiring Cable Specifications and Requirements” on page 177.
To Next Page
Loading...
