AquaTrans™ AT600 User’s Manual 21
Chapter 2. Clamp-On Fixture and Transducer Installation
2.3.2 Installing C-RS or C-PT Transducers with an RG62 Cable
The AT600 flow meter can be connected directly to a C-RS or C-PT transducer with an optional RG62 cable,
which has a BNC connector at transducer end. Thus, the BNC to SMA Adapter is not needed.
This RG62 cable has a submersible cable option for the C-RS transducer. Also, there is a junction box option
for the C-RS and C-PT transducers, which provides extra physical protection for the BNC connection on the
transducer.
To Next Page
Loading...
