AquaTrans™ AT600 User’s Manual 181
Appendix B. Data Records
B.4 Diagnostic Parameters
The values for the diagnostic parameters immediately after commissioning of the meter and verification of
proper operation should be entered below. These initial values can then be compared to current values to
help diagnose any future malfunction of the system.
Table 190: Diagnostic Parameters
Parameter Initial Value
Velocity
Actual Volumetric
Standardized Volumetric
Fwd. Batch Totals
Rev Batch Totals
Net Batch Totals
Batch Totalizer Time
Fwd. Inventory Totals
Rev Inventory Totals
Net Inventory Totals
Inventory Totalizer Time
Mass Flow
Sound Speed
Reynolds
Kfactor
Transit Time Up
Transit Time Dn
DeltaT
Up Signal Quality
Dn Signal Quality
Up Amp Disc
Dn Amp Disc
SNR Up
SNR Dn
ActiveTW Up
ActiveTW Dn
Gain Up
Gain Dn
Error Status
Reported Error
Up Peak
Down Peak
Peak % Up
Peak % Down
To Next Page
Loading...
