GE AquaTrans AT600 - 1.5 Installing the Electronics Enclosure

AquaTrans™ AT600 User’s Manual 5
Chapter 1. General Installation Instructions
1.5 Installing the Electronics Enclosure
The AT600 electronics is housed in a powder-coated, aluminum, NEMA type 4X/IP67 enclosure suitable for
indoor or outdoor use. See Figure 5 below for the mounting dimensions and weight of the AT600 electronics
enclosure.
Figure 5: Mounting the AT600 Electronics Enclosure
Weight is about 1.5 kg
Pipe Mount
Wall Mount
for the whole meter Assembly
M16 GLAND x3
202
13
3
63.50
128
120
160
72.50
M20 GLAND x2
202
226
2 Inch Pipe
72.50