GE AquaTrans AT600 - Additional Device Status

Chapter 6. Communication
166 AquaTrans™ AT600 User’s Manual
6.3 Additional Device Status
Command 48 returns 4 bytes of data, with the following status information:
Table 185: HART Additional Device Status
HART Additional Device Status
Class Device Status Bits SetByte Bit Error Description
0 0 Amplitude Error Error 4, 7
1Low Signal Error 4, 7
2 Sound Speed Error Error 4, 7
3 Velocity Range Error 4, 7
4 Signal Quality Error 4, 7
5Cycle Skip Error 4, 7
6 Reserve
7 Reserve
10Reserve
1 Reserve
2 Reserve
3 Reserve
4 Reserve
5 Reserve
6 Reserve
7 Reserve
2 0 FPGA error; 4, 7
1 Setting files CRC error; 4, 7
2 Flash Error 4, 7
3 KEY/LED Error 4, 7
4I/O Error 4, 7
5Display Error 4, 7
6RTC Error 4, 7
7 Reserve
3 0 In configure mode; 4, 0
1 Not calibrated; 4, 0
2 Reserve
3 Reserve
4 Reserve
5 Reserve
6 Reserve
7 Reserve