GE AquaTrans AT600 - 4.7.6 Transducer Setup (Wetted); 4.7.6.1 Entering a Standard Transducer (Wetted)

Chapter 4. Initial Setup and Programming
68 AquaTrans™ AT600 User’s Manual
4.7.2 Mounting Type
4.7.2.1 Setting the Mounting Type
Select Mounting Type and press [√]. The following screen opens.
Select
Clamp-on if need and press [√] to return to the previous screen.
Select
Wetted if need and press [√] to return to the previous screen.
Sensor Setup
Meter Setup
Pipe
Transducer
Mounting Type
Mounting Type
Wetted
Clamp-on
Mounting Type
Wetted
Clamp-on