GE AquaTrans AT600 - Initial Settings

Appendix B. Data Records
180 AquaTrans™ AT600 User’s Manual
B.3 Initial Settings
The values for the initial measurement settings immediately after commissioning of the meter and
verification of proper operation should be entered below.
Table 189: Initial Settings
Parameter Initial Value
Pipe OD
Pipe ID
Pipe Wall Thickness
Pipe Material
Pipe Sound speed
Lining Thickness
Lining Material
Transducer ID
Transducer Frequency
Transducer Wedge Type
Transducer Wedge Angle
Transducer Wedge SOS
Transducer TW
Traverses
Fluid Type
Fluid SOS
Fluid Minimum SOS
Fluid Maximum SOS
Fluid Temperature
Transducer Spacing