8-4 CASE Revision C
2060290-201
Entering Test Information
Entering Test Information
Overview
Depending on your system configuration, the Test Information window
will open automatically or you can display it with the Test Information
button.
These are the tabs of the menu
Patient Information
Test/Personnel
Medications
Closing a tab with Cancel or OK will bring up the acquisition screen.
Patient Information Tab
The Patient Information tab is open.
1. Verify the patient's name and ID. If the data is incorrect, click
Modify to change.
2. Enter a designation for the Room (5 characters max.).
3. Select a Location Number or a Location Name (names can be
configured on the MUSE tab, see “MUSE Tab” on page 12-55).
4. Check that the patient information is complete.
Note
Depending on the selected reference value equation, the program
requires the gender, height, weight, date of birth, and race data for
calculation of the spirometry reference value (see section “Spirometry
Reference Value Equations, Interpretation Modes, Measurements”
on page B-13).
You can assign a location name to the location number (see section
“MUSE Tab” on page 12-55).
The Patient Information can be assigned to the patient file or only to
the pending test.
To Next Page
Loading...
Need help?
General
