Revision C CASE 6-33
2060290-201
After the Test — Post Test Review
Tabular Summary
The Tabular Summary window displays test data in three tabular
formats:
stage format: 1 line per stage, or
detailed format: 1 line minimum per 30 seconds
all entries
The Tabular Summary can be configured. See “Configuring the Tabular
Summary” on page 12-14 for details.
Use Detail or All entries to enter or edit data.
1. Click the value to change.
2. Enter the new value. Edited values are bold.
To enter new data:
1. Click in an empty field.
2. Enter the new value.
Note
Only the stage format of the Tabular Summary is transferred to the
MUSE system.
METS Formula
See “METS Formula (Metabolic Equivalents)” on page 6-22 for details of
the METS formulas.
Between two stages, the METS value will be interpolated. The correct
METS value of a stage is reached after a stage time of 60 seconds (default
A Select to display the stage format (1 line per stage).
B Select to display the detailed format (1 line minimum per 30 seconds).
C Click the Tabular Summary tab to display the stage format.
D Select to display all entries.
To Next Page
Loading...
Need help?
General
