4-8 CASE Revision C
2060290-201
Patient Records of External Programs
Patient Records of External Programs
The system only supports the GE Healthcare Holter ECG program
MARS PC as well as ndd’s external spirometry test program EasyWare.
Note
GE Healthcare is not in a position to guarantee full compatibility of
external programs with CASE.
In conjunction with external programs, the patient record is always
maintained in CASE while the external program handles the test data.
At the end of the test, CASE will only receive a summary from the
external program and save this summary with the patient record.
Before selecting the external program, choose a patient in CASE. To
change the selected patient you will have to exit the external program
and select another patient in CASE.
Dialog between CASE and the external program:
1. Start CASE.
2. Select patient.
3. Select external program on procedure selection screen (the external
program must already be configured).
4. Perform examination (e.g. Holter ECG).
5. Return to CASE, summary and recording will be assigned to the
patient record.
An external program can be activated only after it has been configured as
described in section “Devices Tab” on page 12-53.
Note
When the configuration of external programs changes, maintain the
compatibility to ensure that stored tests remain accessible.
To Next Page
Loading...
Need help?
General
