12-58 CASE Revision C
2060290-201
System Configuration
Option Code Tab
Click the Option Code tab to open the option code window. If you have
purchased additional software options, enter the option codes to activate
the software options. The code numbers are given on the supplied option
code sheets or on a disk.
1. Click Modify....
2. When asked Change software option. Are you sure?, click Yes to clear
the window.
3. Enter the option code in the appropriate field, or
4. Click Load to load the option code from disk.
5. To enable an option for a limited period of time, click the icon and
enter the expiration date (if not yet displayed).
Note
If you are working with the simulated test data Test Patient you
can activate all options with the code number "123".