5-24 CASE Revision C
2060290-201
Post Test Review
Printing the Full Disclosure ECG
You can either print the entire full disclosure ECG or a selected segment.
Selecting an ECG Segment
1. Click to mark the beginning of the segment. A flag appears.
2. Click again to mark the end of the segment. A second flag appears.
Printing
1. Click the printer icon. The print setup window opens.
2. Select the paper speed.
3. Click the Format-1 option button, if you wish to print only one lead.
4. Select the lead.
5. Click the Format-2 option button, if you wish to print multiple leads,
and select the leads.
6. This box indicates the number of pages to print; check paper supply
before printing.
7. Click the Save button to save the print setup.
8. Initiate the printout or close the window with Cancel.
Enabling the Zoom Mode
1. Click the zoom icon.
2. Position the magnifying glass on the region of interest and click.
An enlarged view of the selected region appears.
The operating controls basically remain the same. When you click the
printer icon, however, only that page will be printed. Click the zoom icon
again to exit the zoom mode.
To Next Page
Loading...
Need help?
General
