Revision C CASE 8-11
2060290-201
Conducting Spirometry Tests
The flow-volume loop of the current test and of the best test are
displayed. The table shows the measuring values (Act.), the reference
values and the percentage deviation of the current test.
A Click option button to display the volume-time curve.
B FEV1 value.
C Click option button to display the Current test, the Best test or the ATS
Summary.
D System evaluation according to the selected interpretation mode (for Best test
only).
E Measuring values, reference values and percentage deviation according to the
selected equation for calculation of the reference values.
F ATS acceptance of the current test, ATS statement below.
To Next Page
Loading...
