1-10 CASE Revision C
2060290-201
Safety Information
Caution
Equipment Damage — Before connecting the device to
the power line, check that the voltage and frequency
ratings of your power line match those indicated on the
device label.
Equipment Damage — Do not set up CASE in the direct
vicinity of a window. Rain, humidity and sunlight may
damage CASE. Do not operate CASE in the vicinity of
heating appliances (radiators). Do not block air vents and
do not place any objects on the monitor or equipment
damage could result.
Equipment Damage — Do not exert pressure on the
monitor screen. Excessive pressure may damage the
display.
Loss of Data — To avoid loss of data, make a daily
backup of the program and database folders (as
determined during installation).
Equipment Damage — Set up the device in a location
which affords sufficient ventilation. The ventilation
openings of the device must not be obstructed. The
ambient conditions must be ensured at all times.
Restricted Sale — In the USA, U.S. Federal Law restricts
this device to sale by or on the order of a physician.
Password Protection — If access to the system is
protected with a password, the password must be stored
in a secure place and made available to registered system
users.
Acquisition Module — Use CASE only in conjunction
with the CAM-14 acquisition module.
Equipment Configuration — The equipment or system
should not be used adjacent to, or stacked with other
equipment. If adjacent or stacked use is necessary, test
the equipment or system to verify normal operation.
The product is compliant with EN/IEC 60601-1-2 and applicable
amendments. Refer to the Electromagnetic Immunity information in this
product’s service manual.
To Next Page
Loading...
Need help?
General
