Revision C CASE 5-9
2060290-201
Recording a Resting ECG
3. Check the 10-second ECG and data.
4. Select a different screen format, if necessary.
5. Display the Interpretation and check the system evaluation and ECG
measurement results.
6. If necessary, repeat the procedure with ECG Acquisition.
7. If you do not wish to record the ECG for a prolonged period of time
(see next page), click Stop FD/Post Test Review to terminate signal
acquisition.
Note
Clicking Stop FD/Post Test Review brings up the Test Summary
(see “Test Summary” on page 5-11).
To Next Page
Loading...
