GE Concord 4 Series Installation Instructions

Concord 4 Series Systems 106
Appendix D:
Software
Release Notes
Specifications
Power Requirements: .....Class II, 16.5 VAC, 40 VA, 60 Hz (part no. 600-1023 or 600-1024)
Rechargeable Batteries: ..12 VDC, 4.5Ah Lead-Acid (part no. 60-681) OR 12 VDC, 7Ah (part no. 60-
680). The battery will last 24 hours with no AC and specified standby load
Radio Frequency: ............319.5 MHz
Nominal RF Range: ........1,000 feet (305 meters) typical open air
Storage Temperature Range:- 30° to 140° F (-34° to 60° C)
Operating Temperature Range: 32° to 120 ° F (0° to 49° C)
Maximum Humidity: ......85% Relative Humidity (non-condensing)
Auxiliary Power Output: 1.0 A @ 9 to 14 VDC (12 VDC typical)
Dimensions: .....................14 in. (35.6 cm) x 12 in. (30.5 cm) x 3.0 in. (7.6 cm) (H x W x D)
WWW.DIYALARMFORUM.COM

GE Concord 4 Series Specifications

General

User Codes	230
Backup Battery	12V 4Ah rechargeable battery
Wireless Frequency	319.5 MHz
Communication	POTS, optional cellular and IP modules
Wireless Capability	Yes
Keypad Options	Multiple keypad options including touchscreen
Wired Zones	8 on board
Power Supply	16.5 VAC Transformer
Compatibility	Compatible with GE Security wireless sensors
Zones	Up to 96
Event Buffer	512