Concord 4 Series Systems
35
The following describes how to program the settings that appear under DOWNLOADER PHONE.
Phone Options Menu
The PHONE OPTIONS menu lets you set up system phone access and communications that affect
the whole system (global) or a specific partition.
The following describe how to program the Phone Options settings that appear under
GLOBAL.
Streamlining (pager 1: 01036, pager 2: 01046, pager 3:
01056, pager 4: 01066, pager 5: 01076)
Phones-Pager Phone 1-5 (Default = on)
This setting determines whether the panel includes (off) or excludes
(on) the account number when reporting to a pager.
To turn Streamlining off or on:
1. With the display showing STREAMLINING OFF/
ON
(current setting), press 1 (off) or 2 (on). The
display flashes the entered setting.
2. Press # and the display shows the new setting.
Ptn Assignment (pager 1: 01037, pager 2: 01047, pager
3: 01057, pager 4: 01067, pager 5: 01077)
Phones-Pager Phone 1-5 (Default = 1)
This setting determines the partition that reports to a pager. All parti-
tions can be assigned to report to a single pager.
To set up Partition Assignments for pager
reporting:
1. With the display showing PARTITION ASSIGN 1-
6
(current setting), press 1-6 to select the
desired partitions. The display flashes the
entered settings.
2. Press # and the display stops flashing.
Phone Number (01090)
Phones-Downloader Phone (Default = none)
Use this setting to enter the phone number of an off-site computer that
can be used to program the panel through the phone line. Phone numbers
can be 1 to 24 digits long, including pauses or * and # characters.
Note
Call-waiting services should be disabled to prevent interrupting panel commu-
nication to the downloader. To program a dialing prefix that disables call-wait-
ing, see the Call Wait Cancel setting under the menu
PHONE OPTIONS—
GLOBAL
.
To enter pauses, press C.
To enter *, press and hold 7 for about two seconds.
To enter #, press and hold 9 for about two seconds.
To program a downloader phone number:
1. With the display showing PHONE NUMBER (cur-
rent number), enter the desired phone number.
The display flashes the entered number.
2. Press # and the display shows the new setting.
To delete a downloader phone number:
1. With the display showing PHONE NUMBER (cur-
rent number), press D to erase the number. The
display shows
PHONE NUMBER_.
Phone Test (02000)
Phone Options-Global (Default = on)
This setting determines if the user can, at any time, test the communica-
tion from the panel to the central station or a pager by entering
8 +
CODE + 2 (# + 8 + CODE + 2 from a touch-tone phone).
Note
For UL 1610 & 1635 listed installations, this feature must be set to on.
To turn the Phone Test setting off or on:
1. With the display showing PHONE TEST OFF/ON
(current setting), press 1 (off) or 2 (on). The
display flashes the entered setting.
2. Press # and the display shows the new setting.
WWW.DIYALARMFORUM.COM
To Next Page
Loading...
Need help?
General
