GE Concord 4 Series Installation Instructions

Concord 4 Series Systems
93
Table B3: System Event Trigger Numbers
System Event Description
Trigger
No.
Null Trigger (used for direct control) Activated only by schedule or direct command. 000
Fire Alarm When Fire sirens are started. 001
Police Alarm When Police sirens are started. 002
Auxiliary Alarm When Auxiliary sirens are started. 003
Any Audible Alarm When any of the above sirens are started. 004
Silent Alarm (sensor groups 2, 3, and duress)
When a group 2 or 3 sensor goes into alarm or when a duress
alarm is activated (does not include groups 25, 27, 28, or 32).
005
Any Audible or Silent Alarm
When any alarm is started (does not include groups 25, 27, 28,
or 32).
006
HOM Group 27, 28, 32 in Alarm When a sensor in group 27, 28, or 32 goes into alarm. 007
Major Trouble (phone or receiver failure) When a receiver failure (S94) or a phone failure (S96) occurs. 008
Arming to STAY or AWAY When the system is armed to level 2 or 3. 009
Arming to AWAY When the system is armed to level 3. 010
AVM is Interactive (audio session in progress)
When the central station operator begins listening or talking to
the premises.
011
Fail-to-Communicate (panel can’t call CS or pager) When the fail-to-communicate output is activated. 012
AVM Trip (edge) When an AVM alarm occurs, output is activated momentarily. 013
Keychain Touchpad Star Button-Press When the star button on a keychain touchpad is pressed. 014
Smoke Power (for resetting 4-wire smoke detectors) Deactivated when hardwire smoke detectors need to be reset. 015
Exterior Siren Activated for police or fire alarms. 016
Interior Siren Activation follows all system noises 017
AVM Trip (pulse) When an AVM alarm occurs, output is deactivated for 10 ms 018
State of System Status Follows the state of system status (ready or trouble). 019
Tamper Condition When any tamper is tripped 020
Closing Report Sent
When a closing report has been successfully transmitted to the
central station.
021
Arming to Level 1 When the system is disarmed. 022
Group XX in Alarm When any sensor in group XX goes into alarm Table B4
Sensor XX in Alarm When sensor number XX goes into alarm Table B5
Sensor XX Open When sensor number XX is opened Table B5
WWW.DIYALARMFORUM.COM

GE Concord 4 Series Specifications

General

User Codes	230
Backup Battery	12V 4Ah rechargeable battery
Wireless Frequency	319.5 MHz
Communication	POTS, optional cellular and IP modules
Wireless Capability	Yes
Keypad Options	Multiple keypad options including touchscreen
Wired Zones	8 on board
Power Supply	16.5 VAC Transformer
Compatibility	Compatible with GE Security wireless sensors
Zones	Up to 96
Event Buffer	512