[EN] English - K0449 Instrument parts, accessories and options 1-3
Issue 1
1.3 The display
This is a LCD with a colour display and a touch-screen. To
make a selection, lightly tap on the applicable display area with
a finger; see Section 2.9 (Display operation).
1. Status bar: This includes:
a. Battery indicator b. Date and time
c. Indicators for a Pressure connection, a HART protocol
resistor, an IDOS connection, Datalog and wireless
operation; for example:
: Pressure; : HART; : IDOS
2. CH1: Window for the channel 1 settings and values; see
Section 2.10.
d. Measure or source indication:
: Measure; : Source
e. Function (voltage, current, pressure ...)
f. Source process indicator; for example:
: Nudge; : Span check; : Ramp
g. Full scale (FS) range h. Function units
3. Other windows: The number of windows you see on the
display is set by the number of task selections and external
modules you are working with (maximum: 6); see Section 2.9.
4. Tap this button to set up the Task, set up the instrument
(Configure) and to access Help (?). see Section 2.10
(Menu sequence).
5. Tap this button to maximise each of the available
windows in sequence; see
Section 2.9.4
6. Pause (II) or Play (X): Tap (II) to hold (freeze) all the data on
the display. To release the display and continue, tap (
X).
Figure 1-6: Example
display
h
b
1
2
4
3
g
a
d
c
e f
To Next Page
Loading...
