Issue 1
8-6 HART
®
device operations K0449 - [EN] English
2. Set the HART Resistor in the Advanced menu:
3. Complete the electrical connections and continue with the
HART menu operation; see Section 8.5.
8.4.3 Communicator attached to a network
In this example, the calibrator connects directly to a network.
There must be a 250: resistor in series with the loop power
supply and the HART device.
1. Set the function for HART:
e2
Set to On
Section 2.9
a
b
c
d
Home display
TAP
No functions
on channel 2 (CH2)
HART Function is set
250: resistor is set to Off
d1
a
b
c
Set HART
Section 2.10.4
Home display
TAP
To Next Page
Loading...
