Issue 1
2-8 Prepare the instrument K0449 - [EN] English
2.10.1 Procedure to set the basic operations:
2.10.2 Procedure to see the instrument status
Description
Sets the power off automatically after the
specified Timeout period. To save the battery
power, set this to On.
Status: On or Off
Timeout: 00:02:00 to 01:00:00 hours:minutes:seconds (hh:mm:ss)
Sets the backlight. Low values save battery
power; see Section 2.5.5 (Operating time).
Timeout: 00:02:00 to 02:00:00 hours:minutes:seconds (hh:mm:ss)
Intensity: 20, 40, 60, 80, 100%
Sets the date and time. The calibration function
uses this to give calibration messages.
Date: day/month/year (dd/mm/yy) OR month/day/year (mm/dd/yy).
The format is factory configured.
Time: 24 hour;
hours:minutes:seconds (hh:mm:ss)
Sets the language.
Selected: English (Other languages to be released).
Sets the volume of the tones and alarms.
Volume: Mute, Low, Medium, High.
TAP
Configuration
2
1
3
Settings
3
B
C
D
E
A
A
B
C
D
E
TAP
Configuration
2
1
3
Status
The amount of memory available (in MB and as a
% of the total on the device): internal memory;
USB memory; micro SD card
Charging or Battery Powered, and the amount of
charge in 1% increments
The date of the next calibration
To Next Page
Loading...
