Issue 1
2-6 Prepare the instrument K0449 - [EN] English
2.9.3 Enter text
There are alphanumeric keypad displays for these items:
• Captions; see Section 2.10.4 (maximum: 15 characters; all
characters permitted)
• Filenames (maximum: 10 characters; no special characters)
1. Tap in the applicable characters.
2. To accept the data and go back to the previous display, tap
on the completed text in the data entry box.
2.9.4 Maximise/minimise a window
You can have up to 6 functions on the display. To set a Process
(measure operations), an Automation option (source
operations), or other Settings you must maximise the
applicable function:
1
2
Next keypad: To use characters on the next keypad
(upper case > lower case > numeric), tap this button.
Delete: To delete the last character in the data entry box,
tap this button.
Escape: If there are no characters in the data entry box,
the Esc button replaces the Del button. To leave the
keypad and go back to the previous display, tap on the
Esc button.
TAP
Maximise Minimise
*
*
*
Alternative options for step ➀
2
1
1
Processes (measure operations )
Automation (source operations )
To Next Page
Loading...
