[EN] English - K0449 Prepare the instrument 2-19
Issue 1
2.12.2 Advanced Setup options
Use this menu to save and recall personal settings, instrument
calibration settings and other standard instrument operations.
Save: When you have set up the functions you want to see on
the display (Section 2.10.3) and all the measure and source
operations (Section 2.11), save your settings to a file.
Recall: When you want to use the specified settings again,
select the applicable filename from the list.
Erase One File: This deletes one file from the list. You must
confirm that you want to delete the file.
Memory Status: The amount of memory available (in MB and
as a % of the total on the device): internal memory; USB
memory; micro SD card
2.13 The Help menu
The Help menu includes electrical connection diagrams to help
you set up and use the electrical functions on channel 1 (CH1),
Channel 2 (CH2).
To Next Page
Loading...
