[EN] English - K0449 HART
®
device operations 8-5
Issue 1
2. Set the HART Resistor in the Advanced menu:
3. Complete the electrical connections and continue with the
HART menu operation; see Section 8.5.
8.4.2 External loop power
In this example, there is an external power supply.
1. Set the functions for channel 2 and HART:
e2
Set to “On”
Section 2.9
a
b
c
d
Home display
TAP
Measure current on
channel 2 (CH2)
Range: ±55 mA
HART Function is set
250: resistor is set
Maximum: 30V
e1
a
b
d
c
Set HART
Section 2.10.4
Set Current; Measure
Section 2.10.4
Home display
TAP
To Next Page
Loading...
