Issue 1
8-8 HART
®
device operations K0449 - [EN] English
8.5 Start HART menu
operations
When the power supply connections are complete, you can do
a search for the applicable HART device and start the
communications process. You use the same sequence of steps
for all the power supply options:
8.5.1 HART menu - Information (Sensor, Hardware, Settings)
5
6: Continue into the HART menu structure
7: Go back to the Home display. This shows the primary variable and
the loop current supplied (in digital form) by the HART device.
1
2
7
4
Home display
3
6
3 to 5: Set the search
options and continue
2: Select
Search
1: Start all HART
selections from
the HART menu
TAP
See
Section 8.5.2
D
E
F
A
B
C
To Next Page
Loading...
