GE Druck PM 620

Issue 1
2-10 Prepare the instrument K0449 - [EN] English
• If applicable, set a Utility for the function: item
a. Max/Min/Avg; see Section 2.10.6
b. Switch Test: CH1, P1, P2 and IDOS functions use the
CH2 switch connections; CH2 functions use the CH1
switch connections. See Chapter 3
c. Leak Test (Pressure options only); see Chapter 4
Note: If you make the connections for a switch on CH1 or CH2,
you cannot set another function on that channel.
2.10.4 Set a function
This example shows the sequence to set the Channel 1 (CH1)
function. It is a similar procedure for other functions.
C
B
A
Continued
C
TAP
Select the function list
(Measure or Source)
Task Settings
Task SettingsSelect Function Channel Settings
1
2
3
4
97 8
5
Channel Settings
Source
Measure
6
Section 2.10.5

(Units)
Section 2.10.6

(Utility)
Section 2.9.3

(Caption text)