[EN] English - K0449 Maintenance procedures 9-1
Chapter 9: Maintenance procedures
9.1 Introduction
This section gives procedures to maintain the unit in a good
condition. Return the instrument to the manufacturer or an
approved service agent for all repairs.
Do not dispose of this product as household waste. Use an
approved organisation that collects and/or recycles waste
electrical and electronic equipment.
For more information, contact one of these:
• our customer service department:
(Contact us at www.gesensinginspection.com)
• your local government office.
9.2 Clean the unit
Clean the case with a moist, lint-free cloth and a weak
detergent. Do not use solvents or abrasive materials.
9.3 Replace the
batteries
To replace the batteries, refer to Section 2.5. Then re-attach
the cover.
All the configuration options stay in memory.
To Next Page
Loading...
