[EN] English - K0449 Prepare the instrument 2-13
Issue 1
c. Pressure operations with a PV 62x pressure station (refer
to the user manual - K0457)
2.11.1 Set the Process options (measure )
Note: Section 2.9 (Display operation) shows how to set and
change the values on the display.
Tare Use Tare to set a temporary value for zero. This makes an
adjustment to all subsequent readings on the display.
Alarm: The alarm includes a “beep” sound if Audio is set
(Section 2.10.1).
Set the tare to the reading on the display.
Set On or Off
Shows the stored tare value. Tap it to set
another value.
Previous: Back one display
Home: Back to start
1
2
3
TAP
*Set the low alarm value
Set On or Off
*Set the high alarm value
*Default (low/high) = Range limits
Previous: Back one display
Home: Back to start
Alarm state
1
2
3
To Next Page
Loading...
