Issue 1
2-14 Prepare the instrument K0449 - [EN] English
Filter: You can set the Band and the Time Constant for the low pass
filter:
Definitions
Flow:
(Square root function)
Set the band (%FS). See Definitions
Set On or Off
Set the time constant. See Definitions
Previous: Back one display
Home: Back to start
1
2
3
TAP
Band: The filter compares each new value with the
previous value. If the new value is outside the
band, it is not filtered.
Time
Constant:
This sets the cut-off frequency for the filter. Higher
value (in seconds) = more filtering.
Set On or Off
Previous: Back one display
Home: Back to start
1
2
3
TAP
To Next Page
Loading...
