[EN] English - K0449 Prepare the instrument 2-11
Issue 1
2.10.5 Set the units
If a function has alternative units, you can set another unit. If
there are no alternatives, the area is shown grey.
2.10.6 Set up a utility: Maximum/Minimum/Average example
This example shows the sequence to set the Max/Min/Avg
utility. You can use the same procedure for these options:
• Switch Test; see Chapter 3
• Leak Test (pressure options only); see Chapter 4
Channel Settings Task Settings
7 8
TAP
Task Settings
1
2
3
4
Channel Settings
5
6
Channel Settings Task Settings
7 8
TAP
Task Settings
1
2
3
4
Channel Settings
5
6
Press the “reset” button to
get a new set of values.
To Next Page
Loading...
