GERAFT LOGIQ P9/P7
D
IRECTION 5604324, REVISION 11 DRAFT (JANUARY 24, 2019) SERVICE MANUAL
5-90 Section 5-11 - Common Service Desktop (R3 only)
To remotely start, restart, or shut down the LOGIQ P9/P7:
1.) Navigate to Utility (second page) > Service > Utilities > Disruptive Mode Utility and set
Disruptive mode to On.
2.) Navigate to Utility (second page) > Service > Utilities > System Shutdown and then select an
operation:
- To shut down the LOGIQ P9/P7, select Shutdown System.
- To restart the LOGIQ P9/P7, select Restart System.
- To shut down the application software, select Shutdown Application.
3.) To retain the current setting for Disruptive mode, select Retain Disruptive Mode.
4.) Click Submit Request.
For more information, see:
• Utilities on page 5-73
To Next Page
Loading...
