GE MDS ORBIT MCR User Manual

108 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
 Power - The transmit power of the radio. Valid values are: 20-30 dBm – (DEFAULT -
30dBm)
 Dwell Time - Time spent on a channel. Valid values are: 10-400 ms - (DEFAULT - 50ms)
 Beacon Interval - Time spent on a channel. Valid values are: 10-400 ms -(DEFAULT - 50ms)
Figure 3-52. ISM 900 (NX) S&F PSK Security Configuration
Figure 3-53. ISM 900 (NX) S&F PSK Security Configuration
 Security Mode - The type of authentication to perform
- none - Provide no device authentication or data privacy (DEFAULT)
- psk - Use pre-shared key authentication protocol
- eap - Use Encapsulated Authentication Protocol
 Encryption - The type of encryption to perform
- none - No data privacy
- aes128-ccm - Protect data with 128-bit AES encryption using CCM mode
- aes256-ccm - Protect data with 256-bit AES encryption using CCM mode
 Passphrase - The passphrase used in PSK mode 8 to 64 letters.
 Certificate ID, Key ID, CA Certificate ID – Reference to the remotes certificate material
loaded through the Certificate Management side menu (section 3.9).

GE MDS ORBIT MCR Specifications

General

Brand	GE
Model	MDS ORBIT MCR
Category	Network Router
Language	English