GE MDS ORBIT MCR User Manual

MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 371
Figure 3-236. Import CA Certificate Monitoring
The import status contains the following items:
 Current State – The status of the import task:
- inactive
- transfering
- processing
- cancelling
- complete
- failure
- cancelled
 Detailed Message – The details regarding the operation, such as “Transferring CA certificate”
 Size – The total number of bytes in the file (not displayed on the web UI)
 Bytes Transferred – The number of bytes already transferred or processed (not displayed on
the web UI)
 Percent Complete – The percentage complete for the operation
To view the status of the import process in the CLI, ensure the CLI is in operational mode and then follow
the example below:
> show pki ca-certs import-status
pki ca-certs import-status state complete
pki ca-certs import-status detailed-message “Successfully imported CA certificate”
pki ca-certs import-status size 1586
pki ca-certs import-status bytes-transferred 1586
pki ca-certs import-status percent-complete 100
Client Certificates 3.9.4
The device can manually import client certificates or obtain them via the SCEP protocol. When obtaining
a client certificate via the SCEP protocol, the SCEP server may be instructed to return a new certificate or
renew an existing certificate.
From the WebUI, navigate to Certificate Management / Basic Config. The Client Certificates section
shows the client certificates currently loaded into the device.
Figure 3-237. Client Certificates
Ensure the CLI is in operational mode and follow the example below to view the installed client
certificates:

GE MDS ORBIT MCR Specifications

General

Brand	GE
Model	MDS ORBIT MCR
Category	Network Router
Language	English