MDS 05-6632A01, Rev. F MDS Orbit MCR/ECR Technical Manual 85
Figure 3-37. WiFi Status Information
Type - The type of the interface
Admin Status - The desired state of the interface. (“Up” - meaning operational)
Oper Status - The current operational state of the interface.
NOTE The following information is useful for are advanced WiFi users for debugging.
If Index - The if Index value for the if Entry represented by this interface. Valid values: 1—
2147483647
Phys Address- The interface's address at its protocol sub-layer. For example, for an 802.x
interface, this object normally contains a MAC address. The interface's media-specific
modules must define the bit and byte ordering and the format of the value of this object. For
interfaces that do not have such an address (e.g., a serial line), this node is not present.
Figure 3-38. WiFi Statistics Information
NOTE The following information is reset on system reboot or power cycle.
Discontinuity Time - The time on the most recent occasion at which one or more of this
interface's counters suffered a discontinuity.
In Octets - The total number of octets received on the interface, including framing characters.
In Unicast Pkts - The number of packets, delivered by this sub-layer to a higher (sub-) layer,
which were not addressed to a multicast or broadcast address at this sub-layer.
To Next Page
Loading...
Need help?
General
