GE MDS ORBIT MCR User Manual

308 MDS Orbit MCR/ECR Technical Manual MDS 05-6632A01, Rev. F
Setting the SNMP configuration can be accomplished via the CLI using the following commands:
% delete services snmp agent version v1
% delete services snmp agent version v2c
% set services snmp agent version v3
Create a local user named “User1” with SHA1 authentication with password “sha1Password” and 2.
AES encryption with password “aesPassword”.
Click on the Add button in the User table and then enter “User 1”. Once done, click the Add button. This
will then prompt the user for additional information.

GE MDS ORBIT MCR Specifications

General

Brand	GE
Model	MDS ORBIT MCR
Category	Network Router
Language	English