GE RSTi-EP - Page 161

Chapter 5 Detailed Descriptions of I/O Modules
GFK-2958E RSTi-EP User Manual 157
Specifications EP-2714
System data
Data
Process, parameter and diagnostic data depend on the network
adapter used (refer to the table in Section Order and
Arrangement of the Modules).
Interface
RSTi-EP I/O communication bus
System bus transfer rate
48 Mbps
Inputs
Number
4
Type
CO contact
Material for power and data contacts
Ni-Au, 3 μm
Response time
20 ms
Maximum output current
per channel
5 A at 60°C (140 °F) / 6 A at 55°C (131 °F)
per module
20 A at 60°C (140 °F) / 24 A at 55°C (131 °F)
Switching frequency
max. 5 Hz
Short-circuit-proof
No
Protective circuit
External fusing with 6 A prescribed
Service life with AC-15 load and 1-A switching
current
> 300.000 switching cycles
Module diagnosis
Yes
Individual channel diagnosis
No
Maximum switching voltage
255 V AC, UL: 277 AC, DC corresponding to the derating curve
Reactionless
Yes
Supply
Supply voltage
20.4V – 28.8V
Current consumption from system current path I
SYS
8 mA
Current consumption from output current path I
OUT
20 mA
General data
Weight
83 g (2.93 oz)
For additional general data, refer to the section General Technical Data for I/O Modules.
Overview of the Editable Parameter EP-2714
Channel
Description
Options
Default
0 - 3
Substitute value
Off (0) / On (1)
Off (0)