GE RSTi-EP - Page 171

Chapter 5 Detailed Descriptions of I/O Modules
GFK-2958E RSTi-EP User Manual 167
IB11
0 ... 65535 μs rotating, updated
when counter value changes
†
Internal process data mapping with data format Standard. Depending on the fieldbus specification and the data
format of the communicating fieldbus components the bytes and/or words can be reversed during data transfer.
Process Data
†
Outputs EP-5111
Byte
Format
Name
Bit
Function when
edge 0-1
Remark
QB0 ... QB3
Double word
Comparison
value
depending on parametrization for
triggering of process alarm or setting
the DO, as soon as the condition is met
QB4 ... QB7
Double word
Set value
this value is copied into counter value
in the event of edge 0-1 at bit 5 of the
control word
QB8
Word
Counter word
QX8.0
Activate reset mode
QX8.1
Release DO
QX8.2
Set SW gate
QX8.3
- 84
reserved
QX8.5
Load set value
loads set value into counter value
QX8.6
Reset status bits
counter status bits 9.1 - 9.5
QX8.7
reserved
QX9.0
Deactivate reset mode
QB9
QX9.1
Block DO
QX9.2
Reset SW gate
QX9.3
- 9.7
reserved
†
Internal process data mapping with data format Standard. Depending on the fieldbus specification and the data format of
the communicating fieldbus components the bytes and/or words can be reversed during data transfer.
Process Alarm Data EP-5111
Byte
Bit
Function
B0
X0.0
HW gate activated
X0.1
HW gate deactivated
X0.2
Overflow, underflow or end value reached
X0.3
Comparison value reached
X0.4
Latch value reached
X0.5 - X0.7
reserved
B1
X1.0
Status input channel 0 A (track A)
X1.1
Status input channel 0 B (track B)
X1.2
Status input "Latch"
X1.3
Status input "Gate"
X1.4
Status input "Reset"
X1.5- X1.7
reserved
B2
16 bit time stamp 0 ... 65535μs, rotating
B3