GFK-2958E RSTi-EP User Manual 365
Note: A forgotten password can be overwritten if the network adapter gets restarted with no
modules connected.
Note: The status data can be displayed at all time, regardless of the state of the field bus connection.
Setup changes can only be stored while the field bus is not active.
After registration, the connected station is displayed with all of its active modules.
Note: The web server only registers modules that can communicate on the system bus. Empty slot
modules and other passive modules (for example, AUX modules) are not registered by the web
server and therefor are not displayed in the screen view. Because of this, the numbering of the
modules in the web server view may deviate from the count in the actual station.
To Next Page
Loading...
