EasyManua.ls Logo

GEDA 200Z - Instructions for the Operating Company

GEDA 200Z
100 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Rack and pinion hoist
Assembly and Operating Instructions
10 / 100 BL108 GB Edition 03.2018 Rev. 02
1.5 Instructions for the operating company
This operating manual is an essential component of the machine. The
operating company must ensure that operating personnel are informed
about these guidelines.
The operating company must supplement the operating manual with
operating instructions based on existing national regulations for
accident prevention and for the protection of the environment,
including information regarding supervisory and reporting duties that
take account of company-related specifics, e.g. with reference to work
organisation, work procedures and the personnel employed.
In addition to the obligatory regulations for accident prevention and
industrial safety that apply both in the country of use and at the place
of use, accepted professional rules for working safely and competently
must also be observed.
The operating company must obligate operating personnel to wear
personal protective gear as appropriate to the local conditions.
First aid facilities (first aid kit, etc.) must be kept within reach!
The operating company/user of the machine must not make any
changes, additions or modifications to the machine that could impair
safety without permission from the manufacturer! This also applies to
installing and adjusting safety equipment, as well as welding onto load-
bearing components.
Any replacement and wear parts that are used must correspond to the
technical requirements stipulated by GEDA. This is ensured with
original replacement parts.
Only employ qualified and/or trained personnel for the tasks
described in this manual.
The operating company clearly defines the responsibilities of the
personnel for operation/installation/maintenance. The operating
company is obliged to train all persons authorised to use the machine in
the correct handling of the machine before using it for the first time,
according to the respective area of activity and responsibility of the
authorised individual and using practical exercises.
These instructions must be documented and repeated at regular
intervals.
The legally permissible minimum age must be observed!

Table of Contents