Rack and pinion hoist
Assembly and Operating Instructions
86 / 100 BL108 GB Edition 03.2018 Rev. 02
9.2 Retrieving the platform
Retrieval may become necessary if, e.g.
• there is no mains voltage.
• there are malfunctions in the electrical system.
• the drive has failed.
• the safety gear has triggered.
If the rescuers do not feel sufficiently secure and
qualified to organise and carry out the rescue,
additional relevant authorities must also be notified
(fire service, technical rescue services, works security).
9.2.1 Basic conduct in the event of a rescue/malfunction
• Remain calm and do not act hastily.
• Get an overview of the situation.
• Keep unauthorised persons away.
• Try to find out the cause of the malfunction/defect in the system, e.g.
− Power failure
− Trigger the safety gear
• Inform your superior about the malfunction.
The sequence of the actions can / must be varied by the
attendant / rescue personnel depending on the specific situation
To Next Page
Loading...