Rack and pinion hoist
Assembly and Operating Instructions
60 / 100 BL108 GB Edition 03.2018 Rev. 02
6.5 Emergency shutdown
In situations that present a risk to operating personnel or the hoist, the
load platform can be shutdown by pressing the EMERGENCY STOP
button.
− There is an EMERGENCY STOP button on the manual control
(ground control).
EMERGENCY STOP buttons are
equipped with a latching
mechanism and remain active until
they are manually released (turn
the red EMERGENCY STOP slam
button to the right and pull out).
6.6 Interrupting work – end of work
• Move the load platform down to the lowest position with the DOWN
(manual control) and unload.
• Unplug manual control and keep safe.
• Turn the main switch to “0” and secure with
a padlock.
• Disconnect the mains plug.
To Next Page
Loading...