Rack and pinion hoist
Assembly and Operating Instructions
34 / 100 BL108 GB Edition 03.2018 Rev. 02
3.5.1 Anchoring forces
For the anchoring forces, refer to the following tables. Details are given
of the peak forces occurring for the assembly geometry shown; they do
not include any safety factors.
The anchoring forces apply for all the wind regions in Europe.
Extreme locations may require exceptions.
Local conditions such as:
• mountains, bays, valleys,
• house gullies, thoroughfares, buildings, etc.
can generate wind turbulence and such exceptions.
Assembly height H
[m]
Wind forces for geographical regions [N/m²]
To Next Page
Loading...