Rack and pinion hoist
Assembly and Operating Instructions
7 / 100 BL108 GB Edition 03.2018 Rev. 02
1 General information
1.1 Information about the instruction manual
This operating manual is an essential aid to operating the machine
successfully and hazard-free.
This operating manual contains important instructions on how to
operate the machine safely, correctly and efficiently. Compliance
with these instructions helps to avoid hazards and increases the
reliability and service life of the machine.
The operating manual must be available at the machine at all times
and must be read and applied by every person commissioned to work
on/with the machine, e.g.:
− Operating, fault rectification during work, disposal of operating
materials and auxiliary supplies,
− assembly, maintenance (servicing, general maintenance, repairs)
and/or transport.
You will see a series of illustrations and symbols whilst reading this
manual which are intended to help you navigate through and
understand this manual. The different meanings are explained below.
Emphasises particularly important
words/passages
−
Instruction to personnel. Always given in
chronological order
Images
The illustrations used refer to a specific machine type. They may only
constitute a schematic representation with other machine types. The
fundamental function and operation is not affected by this.
To Next Page
Loading...