Rack and pinion hoist
Assembly and Operating Instructions
85 / 100 BL108 GB Edition 03.2018 Rev. 02
9.1.4 Overload warning device has triggered
The hoist is equipped with an overload warning device which prevents
the load platform from starting when it is overloaded. If the load platform
is overloaded, a red control light (1) illuminates on the trolley switch box
and a alarm signal sounds.
If the warning light is on
Reduce the load in the load
platform until the warning
light (1) goes out and the alarm
signal stops. -Only then is
movement possible.
To Next Page
Loading...