Rack and pinion hoist
Assembly and Operating Instructions
89 / 100 BL108 GB Edition 03.2018 Rev. 02
9.3 Repair
Repair tasks must only be carried out by trained and competent
persons because they require special expert knowledge and skills.
Neither is communicated in this operating manual.
When ordering spare parts please provide the following:
− Type
− Year of manufacture
− Serial No.
− Operating voltage
− Quantity required
The nameplate is located on the trolley of the base unit.
Spare parts must conform to the technical specifications of the
manufacturer! Only use original spare parts from GEDA.
For service or repair tasks, please contact our customer service
department:
Sales and customer service addresses, refer to Chapter 1.3
10 Disposal of the machine
Dismantle the equipment properly at the end of its service life and
dispose of according to national provisions.
Observe the following when disposing of equipment components:
− Drain and dispose of oil/grease in an eco-friendly way.
− Recycle metal parts.
− Recycle plastic parts.
Recommendation:
Contact the manufacturer or commission a specialist company to
handle disposal requirements in accordance with regulations.
To Next Page
Loading...