GEDA 200Z - ECO Landing Level Safety Gate

Rack and pinion hoist
Assembly and Operating Instructions
58 / 100 BL108 GB Edition 03.2018 Rev. 02
6.3.3 “ECO” landing level safety gate
• Turn the load platform towards the landing level safety gate.
Open the landing level safety door
 Take the key (1) out of the bag (2) on the
load platform.

Put the key (1) into the lock on
the “ECO” landing level safety
gate and turn to the right to
unlock the sliding door.
 Push the sliding gate (3) up.
• Open the loading ramp.

The key is connected with a wire
cable and bag to the load
platform so that the load platform
can only be turned to the trolley
with the key removed. This key
can only be removed when the
sliding door is closed.
• Close the loading ramp
Close landing level safety door
 Push sliding door (3) closed until it engages in the lock with key.
 Rotate the key (1) to the left to interlock the sliding door and remove
from the interlocking.
 Put the key into the bag (2) on the load platform.
• Turn platform inwards.
1
1
3
1
2